0086-371-6799708824-Hour Hotline

Home > products > Crushing and screening > Coarse crushing equipment > PE Jaw Crusher
PE Jaw Crusher

PE Jaw Crusher

Feed particle size: 125-1200mm
Throughput: 5-1000T/h

Processing materials: Hard granite, iron ore, limestone, granite, rock marble, cobble

The Jaw Crusher is used as the first step in the crushing process of various ores and rocks.

The Jaw Crusher consists of a frame, an eccentric shaft, a large pulley, a flywheel, a side guard, an elbow plate, a back seat for the elbow plate, a gap adjustment screw, a return spring, a fixed jaw plate and a movable jaw plate. The crushing method of the jaw crusher is the curved extrusion type. When the jaw rises, the angle between the elbow plate and the moving jaw becomes bigger, thus pushing the moving jaw plate closer to the fixed jaw plate, and the material is crushed multiple times through the extrusion, rubbing and grinding between the two jaw plates. The crushed material is discharged freely through the discharge opening at the lower part of the jaw cavity under the action of gravity. With the continuous rotation of the motor, the jaws crush and discharge the material in a cyclical manner to achieve mass production. Translated with www.DeepL.com/Translator (free version)

Resistant to strong impacts Split welded cast steel frame with simple structure and high impact resistance; heavy duty eccentric shaft and bearings to ensure impact resistance of the moving jaw assembly; heavy duty guard plate installed above the moving jaw to withstand strong impact of the material. High quality material finishing The jaw plate and side shield are made of high manganese steel, the elbow plate is made of grey cast iron and the eccentric shaft is made of high strength forged steel, which are made after several times of precision mechanical processing, heat treatment and flaw inspection, with sufficient rigidity and strength. Overload protection mechanism When the equipment is working, there may be materials that exceed its crushing capacity entering, these materials will have an adverse effect on the operation of the equipment, and even damage the equipment, at this time the elbow plate will break by itself to protect the equipment from damage. Easy to operate and maintain Gasket type discharge adjustment device, centralised lubrication system, easy to operate and maintain; symmetrical structure of the jaws, which can be adjusted up and down after wear, increasing the use cycle and saving replacement costs.

For more details about the equipment, please express your needs through the online customer service.

Add a review

Here you can submit your requirements for equipment, processing materials and output of the project, and our relevant engineers will respond as soon as possible

Boutique cases