0086-371-6799708824-Hour Hotline

Home > products > Grinding Series > Medium-fine grinding > YGM High Pressure Suspension Mill
YGM High Pressure Suspension Mill

YGM High Pressure Suspension Mill

Feed particle size: 0-30mm
Throughput: 1-9.5T/h

Processing materials: Limestone, calcite, dolomite, barite, talc, calcium carbonate, gypsum, bentonite

High Pressure Suspension Mill is widely used in metallurgy, building materials, chemical industry, mining, highway, water conservancy and hydropower industries, suitable for processing various non-flammable and explosive materials with Mohs hardness below 9.3 and humidity below 6%, the fineness of the finished product is 0.613mm-0.033mm, and special devices can also be added to grind 30~80 mesh coarse powder.

The complete set of high-pressure suspension roller mill consists of the main machine, reducer, analyser, piping device, blower, dust collector, jaw crusher, bucket elevator, electromagnetic vibrating feeder, electric control system and so on. When the mainframe motor drives the main shaft through the transmission device, the shovel mounted on the shovel frame rotates synchronously with the grinding roller, which rolls in the inner circle of the grinding ring and rotates around its own axis at the same time. The higher the impeller speed, the finer the powder will be. To ensure that the mill works under negative pressure, the increased air flow is discharged into the baghouse through the residual air pipe between the fan and the main engine, where it is purified and discharged into the atmosphere.

[High pressure spring device]: The grinding pressure of the grinding rollers on the material is increased by the action of the high-pressure spring by about a thousand kilograms and the output is then increased. [Overlapping multi-stage sealing]: The overlapping multi-stage sealing of the grinding rollers provides a good sealing effect and a clean working environment. [Wide range of particle sizes]: The particle size of the finished product ranges from 0.613mm (30 mesh) to 0.013mm (1000 mesh). [Constant grinding pressure]: When the grinding rollers and rings reach a certain level of wear, the length of the high pressure spring can be adjusted to maintain a constant grinding pressure between the grinding rollers and rings, thus ensuring a stable yield and fineness.

For more details about the equipment, please express your needs through the online customer service.

Add a review

Here you can submit your requirements for equipment, processing materials and output of the project, and our relevant engineers will respond as soon as possible

Boutique cases