The fluorite powder made from fluorspar is mainly used in chemical, rubber, ceramics, construction and building materials, while the ultra-fine fluorite powder is used in high technology fields such as military cables, fiber optic transmission and precision metallurgy.
After the fluorite is coarsely crushed on the crusher, the fluorite powder is sent to the fluorite mill mainframe for grinding through the elevator and feeding device, and the fluorite powder that meets the requirements is sent to the vacuum cleaner through the blower. The large pieces of fluorspar are transported to the raw material warehouse by a special vehicle, after which the material is then sent by forklift/manually to the jaw crusher for crushing to a size smaller than the maximum feed size of the mill. The crushed fluorspar is brought to a storage hopper by a hoist, and the material falling from the storage hopper is finally fed to the main machine evenly by a feeder. The fluorspar is screened by a sieving system and then conveyed through to the recovery unit. After recycling, it is discharged through the powder discharge pipe, and the material that does not meet the requirements enters the main machine for grinding again. The air discharged from the top of the dust collector enters the blower through the discharge air pipe. The air passage is of circulating type, except for the pressure from the blower to the crusher, which is positive, all other pipes are negative pressure, so the room is in good sanitary condition.
The ultra-fine mill combines crushing, grinding, grading, drying and conveying in one, it is in a very stable working condition, and a grading mechanism is equipped in the main machine, so the grading effect is very good, the product size is very good, there is no pollution of large particles, and the quality of the output powder products is very stable, it is the mainstream equipment for preparing fine powder. What is the price of such a fluorite powder grinding machine? Different fluorite powder manufacturers have different requirements for powder making, so the equipment needed is also different, and the price of the produced fluorite ultrafine powder is also different.
LUM Ultra-fine Vertical Mill
LUM Ultra-fine Vertical Mill
[Feed moisture]: ≤5%
[Finished product size]: 3-45μm with secondary classification can reach 3μm
[Application scope]: It can be used in construction, coating, papermaking, rubber, electric power, metallurgy, cement, chemical, pharmaceutical, food and other industries.
[Applicable materials]: Fluorite, cement raw material, clinker, thermal power plant desulfurization limestone powder, slag powder, manganese ore, coal, barite, calcite, bauxite and other non-metallic minerals with Mohs hardness less than 7 and relative humidity less than 6% have a good crushing effect.
[Performance advantage]: This technology breaks through the technical bottleneck that ultra-fine powder cannot be produced on a large scale, and is expected to replace the imported ultra-fine vertical mill.
If you are interested in our products please call us at
0086-371-67997088 or click Business Link
Online We will be online 24 hours a day, welcome to call. Our customer service staff will provide you with detailed answers, thoughtful service, will be happy to provide you with product information and application knowledge, so that you can not only get valuable equipment, but also get our attentive service.