0086-371-6799708824-Hour Hotline

Home > News > What causes the ultrafine mill discharge size is not uniform

What causes the ultrafine mill discharge size is not uniform

zkj/ Release time : 2023-10-17

Ultra-fine powder mill is relative to the ordinary Raymond mill, is a new type of mill after transformation and design, compared with the ordinary Raymond mill fineness increased a lot, ultra-fine mill is based on the traditional mill for technical improvement, with energy-saving new milling equipment, is a new type of pendulum mill grinding equipment.

The working principle of this equipment, the material is fed into the mill by the feeder, and the shovel knife shovels the material between the grinding roller and the grinding ring to achieve the purpose of fully grinding the material, which is ground under the action of centrifugal force, and the material after grinding goes upward through the wind of the lower channel, and then the analyzing machine is used to sort out the materials that meet the requirements, and the qualified materials can only pass through. After analyzing, the qualified material enters into the powder collector through the pipe, and it will be collected according to the requirement, and the improper dust is collected into the dust collector, so that the finished product can be produced.

Ultrafine Grinding Mill

Ultrafine Grinding Mill

Reasons for uneven fineness of finished product discharge

1. If the grinding roller of the mill is worn more seriously, with the continuous operation of the equipment, the magic soul grinding ring as a direct contact with the material parts, in the powdering process for a long time grinding will produce varying degrees of wear and tear, once abraded, it will affect the fineness of bentonite mill discharge.

2. In the mill milling, if the analyzer blade wear is serious, it will lead to the material after grinding fineness coarser, affecting the quality of grinding, if the wear is more serious, it will also affect the overall performance of the mill, and even shorten the service life of the equipment.

3. Mill in the work of the sieve mesh problems or partially blocked, there will be uneven fineness, and the output is reduced, so be diligent in checking the sieve mesh, found clogging should be cleaned up in time, so as not to affect the normal work.

If you are interested in our products please call us at 0086-371-67997088 or click Business Link Online We will be online 24 hours a day, welcome to call. Our customer service staff will provide you with detailed answers, thoughtful service, will be happy to provide you with product information and application knowledge, so that you can not only get valuable equipment, but also get our attentive service.