Fluorite powder made from fluorite grinding is mainly used in chemical industry, rubber, ceramics, construction, building materials, etc., while ultrafine fluorite powder is used in military cables, fiber optic transmission and precision metallurgy and other high-tech fields.
After roughly crushed on the pulverizer, fluorite powder is sent to the main machine of fluorite mill for grinding through elevator and feeding device, and the fluorite powder that meets the requirement is sent to the vacuum cleaner through blower. The large pieces of fluorite are transported to the raw material warehouse by a special vehicle, after that, the material is fed into the jaw crusher by forklift/manual to be crushed to a smaller size than the maximum feed size of the mill, and the crushed fluorite is taken by the elevator to a storage hopper, from which the material falling down is finally fed to the main machine uniformly by the feeder. The fluorite is screened through a screening system and then conveyed through to a recycling unit. After recycling, it is discharged through the powder discharge pipe, and the materials that do not meet the requirements enter the main machine for grinding again. The air discharged from the top of the dust collector enters into the blower through the discharge air pipe. The air passage is of circulating type, and except for the pressure from the blower to the pulverizer which is positive, all other pipes are negative, so the room is in good sanitary condition.
Ultrafine mill combines crushing, grinding, grading, drying and conveying in one machine, its working condition is very stable, and it is equipped with a grading mechanism in the main machine, so the grading effect is very good, the product particle size is very good, there is no pollution of large particles, and the quality of the product out of the powder is very stable, and it is the main stream of equipment for the preparation of fine powder. What is the price of such a fluorite powder grinding machine? Different fluorite powder manufacturers have different requirements for the preparation of powder, so the equipment needed is also different, and the price of the fluorite ultrafine powder produced is also different.
LUM Ultrafine Vertical Mill
LUM Ultrafine Vertical Mill
[Feed moisture]: ≤ 5%
[Output]: 3-40t/h
[Finished product size]: 3-45μm with secondary classification can reach 3μm.
[Application scope]: It can be used in construction, coating, papermaking, rubber, electric power, metallurgy, cement, chemical industry, medicine, food and other industries.
[Applicable materials]: It has good crushing effect on fluorite, cement raw material, clinker, desulfurization limestone powder of thermal power plant, slag micro powder, manganese ore, coal, barite, calcite, bauxite and other non-metallic minerals with Moh's hardness lower than 7 and relative humidity lower than 6%.
[Performance advantages]: The technology breaks through the technical bottleneck that ultra-fine powder can not be realized on a large scale production, and is expected to replace the imported ultra-fine vertical mill.
If you are interested in our products please call us at 0086-371-67997088 or click Business Link Online We will be online 24 hours a day, welcome to call. Our customer service staff will provide you with detailed answers, thoughtful service, will be happy to provide you with product information and application knowledge, so that you can not only get valuable equipment, but also get our attentive service.
